These are our standard testing prices for the most common antenna and device configurations. We can customise the test report to include your prefered data formate or provide the measured data to a higher resolution.
Single Band Antenna Testing
For example: ISM900, GNSS or 2.4 GHz WiFi antenna.
$
520
5 Degree Resolution
Report including 2D / 3D Plots & Efficiency
Additional Antenna add $325
Download Pattern Viewer
Multi Band Antenna Testing
For example: Dual band WiFi or a cellular antenna.
$
768
5 Degree Resolution
Report including 2D / 3D Plots & Efficiency
Additional Antenna add $480
Download Pattern Viewer
TRP | OTA Device Testing
For example select 2G | W-CDMA | LTE.
$
1125
Tested per carrier requirements
Head & Hand Phantoms available
TRP Report
Additional device TRP tests add $575
½ Day Pasive Antenna Testing
As many antennas tested as fesable within 4 HRs
$
960
Standard Resolution
Basic Report including Efficiency
Spherical results provided in data file
Download 2D | 3D Pattern Viewer
What Next
Get a quote:
Provide the frequencies at which you would like the antenna tested. Generally we recommend bottom, middle and top of band. If the operating band is wide enough we will test every 10 MHz.
For an OTA device test, tell us the carrier and protocol. Remember you will need a test SIM for OTA testing – Not sure, ask.
Provide any special instructions or discus with us directly.
Post or drop of your antenna | device.
Either we will use the test connection provided or modify its location to improve the quality of measurement.
We check the spherical test system calibration with a reference dipole in center of test bands and then mount device on the test platform.
Take a picture of test setup to help orientate the measured test results.
Run the test which take anywhere between 30 miniutes and 2 hours for 5 degree resolution.